You are here:Home > NEWS

What Should We Pay Attention to in talc grinding mill Maintenance?2015-09-08

1. In the use of talc grinding mill, there should be special staff responsible for the supervision, and the operator must have a certain technical level. Before the installation of talc grinding mill, it is necessary to train the operators on technique, to make them learn about talc grinding mill working principles and performance and familiar with the operation procedures.
 
2. Lay down equipment maintenance and safe operation rules to ensure the talc grinding mill a stable running and a long service life. At the same time, have access to necessary maintenance tools, grease and the corresponding accessories.
 
3. talc grinding mill should be inspected after using a period of time, as well as the easy damaged parts such as the grinding roller, grinding ring and shovel blade, etc., to repair and replace timely. In both the pre-use and post- use of the grinding roller, carefully examine the connecting bolts and nuts to see whether there is any of them are loose or not, and to see if the lubricating oil is enough.
 
222.jpg
 
4. Replace the grinding roller for a new one after being used for more than 500 hours, as well as clean every rolling bearing in the grinding roller shell and change the damaged parts timely. The manual pumps and grease gun are available for refueling.
 
5. Lubricate the bearings with 1-MOS2 lubricating grease or ZN-2 sodium bitter grease.
 
6. The grinding roller bearing should be refueled every shift, the main engine central bearing every four shifts and the blower bearing once a month. The temperature of bearing room shall not exceed 70 ℃. Bearing overheating once founded, we should disassemble the bearings and then clean it and the bearing room and other accessories.
 
The correct usage and maintenance of talc grinding mill can effectively improve its service life and work efficiency.

Previous:Preparations before Installing Calcite Grinding Mill
Next:how to grinding process the dolomite powder?