You are here:Home > NEWS

The Methods to Dealing with the Faults of Raymond Mill2016-12-15

We have talked about three methods of how to solve the problems of Raymond mill, last week. But there are more than three problems of Raymond mills in our usual use, so we will learn more methods to deal with the faults of Raymond mill, today.

Question 1: the host of Raymond mill have a large noise and vibration
Reason: the feed volume is small. And there is a serious wear and tear in blade, so that the blade cannot afford the materials. Or there is a high hardness material in the grinding mill, but there is no material layer. Or there is a serious deformation in the grinding roller and grinding ring.
Remedy: adjust the feeding volume, replace a new blade. Change the size of feed particle. Replace the roller, grinding ring in time.

Raymond mill

Question 2: the vibration of fan
Reason: there is some powder be left or some wear in the fan. And the anchor bolts are loose.
Remedy: Remove leaf dust or replace leaves. Tighten the anchor bolts.

Question 3: the bearing damage of Raymond mill
Reason: lack of oil, or seal damage. The lack of maintenance and cleaning in a long time.
Remedy: according to the provisions time to refuel. Clean the machine regularly, replace the oil seal.

We have learned three ways to deal with the failure of Raymond mill failure now. If you have any other questions, please leave your message on our website. We will answer your questions as soon as possible.

Previous:The Common Faults of Raymond Mill And How to Solve Them
Next:Where Can We Find A Good Grinding Mill Manufacturer In Shanghai